|
|
|
How it Works
 The
first question people ask is: “with only one wheel, how does it keep
from tipping over?” The simple answer is that it CANNOT “tip
over”! Our product does not mount to a standard hitch ball.
Instead it is rigidly bolted to your receiver bar by way of a
patented, bi-directional pivot. Constructed of stainless steel
bushings and ¼” thick, laser-cut and welded steel plates, the pivot
provides the up-and-down movement separate from the side-to-side
movement for your unit. This allows the rear wheels of your
ATV to completely stabilize the CaReUNIT so that it CANNOT “tip
over” on its own. So basically, once your receiver bar is
secured into your ATV’s receiver, the CaReUNIT and the ATV become
one piece of equipment. In summary, our device turns your ATV
into a light-weight, fast responding, non-compromising,
five-wheeled, off-road, eXtreme rescuing machine! But don’t
take our word for it, try it for yourself instead.
Contact us today to take advantage of our 30 day free trial
offer and find out for yourself if the ATVCaReUNIT is right for you.
The second most frequently asked question is, “In the folded
position, just how close is the unit to the driver?” We have
thoroughly tested our unit to check for any possible conflict with
the driver over any type terrain. Even on an ATV with an extremely
short wheelbase, the driver naturally seats at a distance far enough
away that it does not allow any contact with our device – no matter
what the terrain! In reality the driver would have to literally lie
down on the rear rack before ever coming in contact with the
CaReUNIT. But, here again, don’t take our word for it – try it for
yourself instead! We cordially invite you to take advantage of our
30 day free trial offer.
|
|
